Amsoil Synthetic R&O/AW Industrial Gear and Bearing Oils

AMSOIL Synthetic R&O/AW Industrial Gear and Bearing Oils are formulated with high-quality synthetic base stocks and additive systems that effectively prevent wear and protect equipment by maintaining viscosity, resisting thermal and oxidative breakdown, preventing rust and resisting the degrading effects of water.

Viscosity Characteristics
AMSOIL Synthetic R&O/AW Industrial Gear and Bearing Oils are very shear-stable and oxidation-resistant, preventing viscosity loss from mechanical shear and viscosity increase from oxidation. RC Series Oils remain fluid at cold temperatures, providing easier startups, quick lubrication circulation and limiting the need for sump heaters. At higher temperatures, RC Series Oils maintain a thick lubricating film, reducing metal-to-metal contact and component wear.

Additive Performance
AMSOIL Synthetic R&O/AW Industrial Gear and Bearing Oils are formulated with complete additive technology to enhance performance. Nondetergent, ashless antiwear additives provide an additional layer of protection against wear in severe conditions, rust inhibitors protect critical components against corrosion in the presence of water or process contaminants, antioxidants increase oxidation resistance and extend lubricant life and foam suppressants prevent foaming and air entrapment.

Water Resistant
AMSOIL Synthetic R&O/AW Industrial Gear and Bearing Oils provide hydrolytic stability (stability in the presence of water) and demulsibility (ability to separate from water), increasing lubricant life, preventing oil/water emulsions and allowing reservoirs to be drained of water.

Performance Features

• Long life / Extended drains
• Thermally stable / Yellow metals compatible
• Antiwear / Antifoam fortified
• Antirust / Antioxidation additives
• Cold temperature performance
• Meet AGMA R&O and Synthetic Gear Oil classifications
• Hydrolytically stable and readily separate from water

Application Recommendation
AMSOIL Synthetic R&O/AW Industrial Gear and Bearing Oils are primarily recommended for gear and bearing applications and circulating systems requiring R&O and/or antiwear additive technology.

RCE is a clear, nonstaining oil with an ISO-10 viscosity designed for high-speed spindles such as those found in textile applications.

The lighter viscosity RC Series Oils (RCF-RCH) provide superior protection in high- and low-pressure gear, vane and piston hydraulic systems, compressors, high-speed bearings, small gear sets, pumps, high-speed spindles, high-speed gears and many other industrial applications. Higher viscosity RC Series Oils, beginning with RCI (ISO 46), meet AGMA specifications for R&O and Synthetic gear oil specifications 1 through 8, respectively, for the lubrication of intermediate-speed equipment where mild shock loading and intermittent service are involved. These applications include machine tools, roller chains, gear reducers, cone drives, large motor bearings, medium-speed ball and roller bearings, blowers and worm gear sets. Consult the manufacturer for proper viscosity recommendations. The ability of RC Series Oils to extend drain intervals is subject to operating conditions and maintenance practices and should be monitored by oil analysis.

Although AMSOIL lubricants are compatible with mineral oil-based lubricants, for optimum performance it is recommended that the system be thoroughly drained and cleaned, if warranted.

Note: AMSOIL Synthetic R&O/AW Industrial Gear and Bearing Oils are not designed for applications requiring Extreme Pressure (EP) agents. For EP fortified lubricants, refer to AMSOIL SG Series Gear Oils.

Applications
The appropriate viscosities of AMSOIL Synthetic R&O/AW Gear and Bearing Oils meet or exceed the following hydraulic oil applications or requirements:

• Denison HF-0, HF-1 and HF-2
• Vickers M-2950-S and I-286-S
• Cincinnati Milacron P-68, P-69 and P-70
• U.S. Steel 127 and 136
• Ford M-6C32
• GM LH-04-1, LH-06-1 and LH-15-1
• Lee Norse 100-1
• Jeffrey No. 87
• BF Goodrich 0152
• Commercial Hydraulics

AMSOIL PRODUCT WARRANTY
AMSOIL industrial lubricants are formulated to meet or exceed accepted industry specifications. AMSOIL warrants that the use of its lubricants will not cause mechanical damage to any mechanically sound equipment when AMSOIL products are used in full compliance with the company’s recommendations. However, the purchaser of these lubricants is responsible for determining if these specifications are adequate and proper for the intended application. The AMSOIL warranty is limited to lubricant performance consistent with indicated specifications. No additional warranty, expressed or implied, can be made.

AMSOIL PRODUCT AVAILABILITY
AMSOIL products are available in 5-gallon pails, 55- gallon drums, 275-gallon totes and bulk quantities. For 275- gallon totes, please allow two to four weeks for delivery. AMSOIL Industrial Lubricants are stocked in Superior, Wisconsin and in select regional distribution centers throughout the United States and Canada. AMSOIL will stock additional quantities of lubricants or special order products based on customer requests and regional demands.

See Pricing Information or Place an Order

Package sizes include:

5-Gallon Pail
55-Gallon Drum
275-Gallon Totes